VDO Ammeter Gauge 100Amp
The VDO Cockpit International Ammeter Gauge, with a 52 mm diameter and a 100A rating, is designed to measure the current flowing through your vehicle's electrical system. It's ideal for monitoring the performance and health of your vehicle's battery and alternator. The gauge provides accurate readings, ensuring you can detect any issues with the electrical system early on. The 52 mm size makes it compatible with standard gauge slots, and the design is typically sleek and easy to integrate into a dashboard.
VDO Ammeter Gauges 100Amp
Colour: Black
Panel hole diameter: 52 mm - 2 1/16"
Range: -100A to +100A DC
Operating voltage: None
Sizes and mounting:
| Installation (Hole) diameter and Outside diameter: |
52 mm - 2 1/16 Inch en 59.25 mm - 2 1/3 Inch |
| Installation depth: |
67.5 mm |
| Locking height with Spinlock nut: |
Not available |
| Locking height with bracket: |
0.5 mm - 8 mm |
| Flushmount: |
None |
Functionality:
| Ampere measurement range: |
-100A to +100A DC |
| Shunt: |
Not applicable |
| Signal input ammeter gauge: |
-100A to +100A DC |
| Accuracy: |
Not specified by VDO |
| Connection: |
M8 hexnut |
| Illumination connection: |
AMP Male blade connector 6,3 x 0,8mm (2x) |
Power supply:
| Operating voltage (Illumination only): |
12 Volt standard - 24 Volt optional |
| Current consumption (Illumination only): |
12 Volt 2 Watt - 24 Volt 2 Watt |
| Reverse polarity protection: |
Not applicable |
| Short circuit protection: |
Not applicable |
Dial & Pointer:
| Deflection angle: |
320° |
| Dial colour: |
Black |
| Dial Illumination: |
Floodlight 12V - 2 Watt White - Green - Red and 24V - 2 Watt - Optional |
| Pointer: |
Red backlight |
| Warning indication: |
None |
| Programming: |
None |
Design:
| Model: |
Cockpit International |
| Lens: |
Single - Anti-glare |
| Standard bezel: |
Triangular black (Threaded ring) |
Protection and standards:
| Front protection class: |
IP64 (DIN 40050) - Ozon proof - UV proof |
| Rear protection class: |
IP42 (DIN 40050) |
| Relative humidity: |
Not specified by VDO |
| Operating temperature: |
-30°C to +85°C |
| CE standard: |
Yes |
| DNV GL Certification: |
Not specified by VDO |
| Mechanical shock 8 hours: |
Max: 1G - 25Hz - 2000Hz |
| EMC test: |
According to EN 13309 and ISO 13766 |
| Nominal position: |
NL 0 to NL 90 - DIN 16257 |
| Housing: |
Plastic flame retardant |
